Slotted vs Drilled vs Plain Brake Rotors: Which Suits Your Car?

0 Comments

Slotted vs Drilled vs Plain Brake Rotors: Which Suits Your Car?

Brake rotors do a tough job. Every time you brake, your pads clamp onto them and turn speed into heat.
The type of rotor you choose affects how well your brakes handle that heat, how they feel and how long
everything lasts.

There are three main types: plain, slotted and drilled. Here's how each one works and which suits the
way you drive.

Plain rotors
Plain rotors have a smooth, solid braking surface. They're what most cars come with from the factory.

Good for: everyday driving, commuting and most family cars.

Why choose them: quiet, smooth, long lasting and easy on pads. For most drivers, a quality plain rotor is
all you need.

Keep in mind: under repeated heavy braking, like towing down long hills, they can be more prone to
heat build up than slotted designs.

Slotted rotors
Slotted rotors have grooves machined across the braking surface. As the rotor turns, the slots sweep
away gas, dust and water from between the pad and rotor, and help keep the pad surface fresh.

Good for: towing, heavy loads, 4WDs and spirited driving.

Why choose them: more consistent bite, especially when brakes are working hard or in wet conditions.

Keep in mind: they can be slightly noisier than plain rotors and may wear pads a little faster.

We covered one example in our look at TRW slotted brake rotors in our News blog.

Drilled rotors
Drilled rotors have holes through the braking surface. The holes help release gas and heat, and they're
popular for their look on performance cars.

Good for: performance and show cars.

Why choose them: a sporty look and good initial bite.

Keep in mind: under repeated extreme heat, like track use or heavy towing, drilled rotors can be more
prone to cracking around the holes. For towing and 4WDs, slotted rotors are generally the more
practical choice.

Drilled and slotted rotors
Some rotors combine both. They're mostly chosen for performance street cars that want the look of
drilled rotors with some of the benefits of slots.

Which rotor suits you?

If you mostly...  Consider
Commute and drive around town Plain rotors
Tow a caravan or trailer Slotted rotors
Drive a loaded 4WD or tour off road Slotted rotors
Drive a performance car on the street Slotted, or drilled and slotted


Whatever you choose, pair your rotors with pads that suit them and the way you drive.

When to replace or machine brake rotors

Rotors wear down over time. Replace them if they're:
• Below the manufacturer's minimum thickness, which is often stamped on the rotor
• Warped, causing vibration through the pedal or steering wheel
• Deeply scored, cracked or heavily grooved
• Showing a large lip around the outer edge

Brake disc machining can restore a smooth surface to a rotor that's still well above minimum thickness.
It's worth asking about, but if the rotor would end up close to the limit, replacement is the better option.

Always replace rotors in axle pairs, and bed in new pads and rotors as recommended by the manufacturer.

Browse brake rotors
Use the part finder to see the brake rotors that fit your car, including ranges from DBA, TRW and
Brembo. Replacing pads too? See our brake pads and our guide to how long brake pads last.

Not sure which type suits your car? Give us a call on 02 9413 3166. We've specialised in brakes since
1980.

Brake rotor FAQs

Are slotted rotors better than plain rotors? For towing, heavy loads and hard driving, slotted rotors can
give more consistent braking. For everyday driving, quality plain rotors work well and are usually quieter.

Are drilled rotors good for towing? Generally, slotted rotors are the more practical choice for towing.
Drilled rotors can be more prone to cracking under repeated high heat.

Can brake rotors be machined? Often, yes, if they're still well above the manufacturer's minimum
thickness. Worn, cracked or thin rotors need replacing.

Should I replace rotors in pairs? Yes. Always replace rotors on both sides of the same axle.

Back to main blog