$0.00 AUD
All charges are applied in current currencyAustralia (AUD $)
Find parts that fit your vehicle
Select your vehicle in the Part Finder at the top of the page and we'll show the parts listed for it.
Find parts that fit your vehicle
Select your vehicle in the Part Finder at the top of the page and we'll show the parts listed for it.
Brake shoes do the same job in a drum brake that pads do in a disc brake. They're common on the rear of utes and 4WDs, and many vehicles with rear discs also use small shoes inside the rotor for the park brake.
Select your vehicle at the top of the page to see shoes that fit. Fit new shoes with fresh hardware and adjuster kits, and check your drums and wheel cylinders at the same time. Questions? Call us on 02 9413 3166.
Not keen on fitting it yourself? Our team will sort it, properly.
No. Brake pads work with disc brakes and clamp onto a rotor. Brake shoes work with drum brakes and press outward against the inside of a drum. Your vehicle may have pads at the front and shoes at the rear.
Often just the shoes. If the drums are within their maximum diameter and aren't scored or out of round, they can be reused. Measure the drums or have them checked when replacing shoes.
Brake shoes commonly last longer than front pads, but it depends on the vehicle, the load and how the handbrake is used. Check them at regular services, especially if you tow.
Usually, yes. New shoes are adjusted so they sit close to the drum without dragging. Self adjusting systems still need an initial setting. Check the handbrake adjustment afterwards.
It's good practice. Springs and clips lose tension over time and can cause noise or uneven wear. A drum brake hardware kit is an easy way to refresh them while the brakes are apart.