0 Comments
How to Change Your Wiper Blades (and Know When It's Time)
Wiper blades are one of those parts you don't think about until the first big storm hits and you can't see
a thing. The good news is that changing them is one of the easiest jobs you can do on your car. No tools,
no workshop, and most people are done in a few minutes.
Here's how to tell when your blades are due, how to find the right ones for your car, and how to change
your wiper blades step by step.
Signs your wiper blades need replacing
Wiper rubber hardens and cracks over time, especially after a winter of cold mornings and a summer of
UV. If you notice any of these, it's time for new blades:
• Streaking or smearing: lines of water left behind after each wipe
• Chattering or juddering: the blade skips across the glass instead of gliding
• Squeaking: usually hardened rubber dragging on the windscreen
• Missed patches: sections of glass the blade no longer touches
• Visible damage: split, torn or peeling rubber, or a bent frame
Most drivers get about a year out of a set before they start to struggle. With storm season coming, now
is a good time to check yours.
Finding the right wiper blades for your car
This is the step people most often get wrong. Your driver and passenger blades are usually different
lengths, and the connector that attaches the blade to the arm varies between cars.
The easiest way to get it right is to shop by vehicle. Enter your make and model in the part finder and our
wiper blades range will show the blades that fit your car. Most of our range comes from Winston's Wipers,
an Australian brand with sets matched to specific makes and models, so you're not guessing at lengths.
If you're not sure, give us a call on 02 9413 3166 and we'll help you find the right ones.
How to replace wiper blades: step by step
Most cars use a simple hook connector, and the steps below cover that style. Some European cars use a
pin, side lock or push button connector instead. The idea is the same, and your new blades will come
with instructions for your connector type.
1. Park somewhere safe and switch the car off. Some newer cars need the wipers moved into a
service position before the arms will lift. Your owner's manual will show you how, usually by
switching off the ignition and pressing the wiper stalk.
2. Protect your windscreen. Lay a folded towel on the glass under the wiper arm. If the arm snaps
back without a blade on it, it can chip or crack the windscreen.
3. Lift the wiper arm away from the glass. It should stay upright on its own. Hold it steady if it
doesn't.
4. Remove the old blade. Turn the blade so it sits at a right angle to the arm. Press the small
release tab where the blade meets the hook, then slide the blade down and off the hook.
5. Fit the new blade. Slide the new blades connector onto the hook until it clicks into place. Give it
a gentle tug to check it's secure.
6. Lower the arm gently. Ease it back onto the windscreen rather than letting it drop.
7. Repeat on the other side. Double check you've put the longer blade on the driver's side.
8. Test it. Spray some washer fluid and run the wipers. You should get a clean, quiet sweep with no
streaks.
That's the whole windscreen wiper replacement done. While you're there, give the glass a proper clean.
Built up grime and bugs wear new rubber faster, and our wash and exterior cleaning range has what you need.
Don't forget the rear wiper
If your car has a rear wiper, it's easy to overlook until you need to reverse in the rain. Rear blades wear
out just like the front ones. Many attach differently to the front blades, so check the fit for your car in
our wiper blades range.
Tips to make your new blades last
• Clean the windscreen and the blade rubber every few weeks with a damp cloth
• Don't use your wipers to clear ice or heavy dirt from a dry windscreen
• Keep the washer bottle topped up so the blades aren't dragging across dry glass
• Park in the shade where you can, as UV breaks down rubber over time
Wiper blade FAQs
How often should I replace my wiper blades? Most blades need replacing about once a year. Replace
them sooner if they start streaking, squeaking or chattering.
Are the driver and passenger wiper blades the same size? Usually not. Most cars have a longer blade on
the driver's side, which is why shopping by vehicle is the easiest way to get the right pair.
How do I find wiper blades for my car? Use the part finder to enter your make and model, and our
wiper blades range will show the blades that fit. If you're still not sure, give us a call.
Do I need to replace my rear wiper blade too? If it's streaking or the rubber looks cracked, yes. Rear
blades wear out the same way front blades do.
Can I change my own wiper blades? Yes. It's one of the simplest jobs on any car. There are no tools
involved and it only takes a few minutes.
Ready for storm season?
Find the right blades for your car in our wiper blades range, or give us a call on 02 9413 3166 and we'll
point you to the right set.
Recent post