0 Comments
How to Detail Your Car at Home: Wash, Clay, Polish and Wax
A proper detail is more than a quick wash. Done in the right order, with the right products, it removes
the grime a wash leaves behind, takes out light swirls and protects your paint for months.
The good news is you can do it at home. Here's how to detail your car step by step, from the wheels to
the interior.
Before you start
• Work in the shade. Sun dries products on the paint before you can work them properly, which
leaves marks
• Make sure the paint is cool to the touch
• Use microfibre. Old towels and rags can scratch
• Work top to bottom. The lower panels are the dirtiest, so do them last
Step 1: Clean the wheels first
Wheels collect brake dust and road grime, and cleaning them last would splash that dirt onto clean
paint. Spray them with a wheel cleaner, agitate with a wheel brush, then rinse thoroughly.
Step 2: How to wash a car without scratches
Most swirl marks come from washing, so technique matters.
1. Rinse the whole car to lift off loose dirt and grit.
2. Use two buckets. One with car wash solution, one with clean water for rinsing your mitt. This
keeps grit out of your wash water.
3. Wash with a microfibre mitt, one panel at a time, working from the roof down. Rinse the mitt in
the clean bucket after each panel.
4. Rinse thoroughly before the soap dries.
5. Dry with a clean microfibre drying towel. Pat or drag it gently rather than scrubbing.
Use a dedicated car wash, not dishwashing liquid, which can strip wax and dry out rubber and plastics.
See our wash and exterior cleaning range.
Step 3: Decontaminate with a clay bar
Run your fingertips over clean paint. If it feels rough, it's carrying bonded contaminants like tar, tree sap
and industrial fallout that washing won't remove. A clay bar lifts them off.
1. Spray a small section with clay lubricant.
2. Glide the clay bar gently back and forth with light pressure.
3. Once the paint feels smooth, wipe the section with microfibre.
4. Fold the clay to a clean face regularly. If you drop it, throw it away, as it will pick up grit.
Claying makes a big difference to how well polish and wax work, and to how smooth the finish feels.
Step 4: How to polish a car
Polish and wax do different jobs. Polish contains fine abrasives that remove a thin layer of paint to take
out light swirls, oxidation and dullness. Wax doesn't fix anything. It protects.
For light swirls, work a polish into one panel at a time with an applicator pad or a dual action polisher,
then buff off with a clean microfibre. Deep scratches that catch a fingernail need a professional.
Step 5: How to wax a car
Wax or sealant protects your paint from UV, rain and grime, and makes the car easier to clean next time.
1. Apply a thin, even layer with a foam applicator. More isn't better.
2. Let it haze according to the product instructions.
3. Buff it off with a clean microfibre towel.
Find polish, wax and sealants in our polish and wax range.
Step 6: Glass, trim and tyres
Clean the glass inside and out with a dedicated glass cleaner. Dress plastic trim to bring back its colour,
and finish the tyres with a tyre dressing.
Step 7: Detail the interior
1. Remove mats and vacuum thoroughly, including under the seats.
2. Wipe hard surfaces with an interior cleaner and a microfibre cloth.
3. Clean and condition leather to stop it drying and cracking.
4. Clean the mats before putting them back.
See our interior and leather care range.
Recent post