JLM Engine Oil Flush Heavy Duty 1000ml (Use Every Oil Change 20-40ltr Cap.)

• Conditions oil and removes dilution and contamination from oil system.
• Add to oil before draining.
• One bottle treats a maximum of 20-40L of engine oil.

JLM Engine Oil Flush HD J04836 is an aftermarket chemical additive designed for use in HDV’s (incl. heavy machinery and stationary engines) This oil-based product is designed to clean accumulated deposits, sludge, gum and varnish from the engine before an oil change.

Benefits:

• Internally cleans and flushes the engine (e.g. cylinder walls, pistons, rings, valve lifters) with highly effective cleaning agents
• Eliminates gum, varnish and sludge
• Easily removes contaminants like carbon deposits, soot and liquids (water and fuel rests)
• Reduces fuel consumption and exhaust emissions by restoring engine condition and enabling the new and fresh oil to perform optimally

Usage

For all gasoline, diesel and LPG engines with or without turbochargers. Compatible with all mineral, semi synthetic or fully synthetic motor oils.

Direction:

1. The engine must be at operating temperature!
2. Before changing oil, pour the contents of one bottle in the crank case of the engine
3. Let the engine run on idle for 15 minutes, alternatively at low and high rpm.
4. Drain the oil from the crank case.
5. Replace oil filter.
6. Refill crank case with recommended fresh motor oil, of the OEM specification

Dosage:

One (1) bottle of 1 liter treats 20-40 liter of motor oil. Shake before use! Do not overdose. Safe to use every oil change.