Blackhawk UCA4981NV2 Front Upper Control Arms Pair to suit Nissan Navara D40 and D23 NP300

Blackhawk UCA4981NV2 front upper control arms, sold as a pair, suit the Nissan Navara D40 and D23 NP300 with two camber pins in the lower control arm.

Highlights

• 3° of caster built in. It restores proper steering geometry on a lifted Navara and leaves the factory adjustment free for fine tuning.
• Clearance where it counts. Revised bends keep the arms clear of the coil and chassis through the suspension's travel, with more room for larger wheels and tyres.
• Easy to service anywhere. They take OE size ball joints and bushes, so replacements are easy to find, even out bush.

Only for models with two camber pins in the lower control arm. Not for single pin models, including some Spanish built D40s. The V2 adds 0.5° of negative camber, and Blackhawk says it achieves good alignments at 70mm of lift without touching the coil tower. For taller lifts, use the BJ4085 extended ball joint.

A bolt-in upgrade for lifted vehicles. Blackhawk says FEA testing showed these arms deflect 3 times less than the OE arms, and VASS engineers have reviewed and certified the design.

Not sure which arms suit your vehicle and lift? Give us a call on 02 9413 3166 with your make, model and year, or ask us on live chat.